Tank Cleaner-20 | Page 8 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

DYE REMOVER-ORG DICHLOR

Product Short Description: High penetrating abilities to remove color from cargo tank surfaces. It is particularly effective when loading color sensitive cargoes such as methanol, isopropyl alcohol, styrene monomer, and ethylene glycol "fiber grade."

Product Technical Specification:

Use a strainer at the pump stack when circulating any solution.

Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

Remarks:

TYPICAL RECIRCULATION METHOD :

Take 10% to 20% DYE REMOVER-ORG DICHLOR with water, Then increase heating more than 60 degree for heavy stains.

Images:

Marine Clean SC

Product Short Description: Marine clean SC is is a superior NON- CAUSTIC BASED cleaner which is developed for use in TANK and other systems

Product Technical Specification:

Odour	Odourless
Appearance	Liquid, colourless to yellow, soluble in water
pH	11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration
Boiling point	>100 °C at 760 mm /Hg
Vapour pressure	Not known
Vapour density	Not applicable
Freezing point	5 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)	1.23

Remarks:

FIRST AID MEASURES:

General:

Remove patient from source of contamination. If unconscious, loosen tight clothing and place patient in recovery position. Never give anything to drink to an unconscious person. Ensure open respiration passage. Seek medical attention if in doubt, show label / MSDS.

Inhalation:

Ensure fresh air and rest.

Skin contact:

Contaminated skin should be rinsed with plenty water.

Eye contact:

Immediately flush with plenty of water for at least 15 minutes. Keep eyes open. Seek medical attention/transportation to hospital. Flush during transport.

Ingestion:

Rinse mouth with water, drink plenty of water, or preferably milk. Consult a doctor if necessary.

PROTECTION AGAINST FIRE AND EXPLOSION

Extinguishing media

Extinguish surrounding fires with suitable extinguisher.

Storage:

Store frost-free, preferably at room temperature. Store in closed containers. Keep away from children.

Handling:

Use rubber or plastic gloves.

Special precaution:

Can degrease skin and squirts will irritate the eyes.

Images:

Fish Oil Turpentines Cleaner

Product Short Description: Neutralizer / Deodorizer for use after the carriage of FISH OIL . One liter of product RXSOL-20-2042-210 will neutralize one liter of FISH OIL. This will also remove trace hydrocarbons and help to improve permanganate times

Product Technical Specification:

ph ::: 6.5 - 8
Density ::: 1.01 g/cm3
Flash Point ::: None
Physical State ::: Liquid

Remarks:

Images:

Tankclean ECO

Product Short Description: Designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid

Product Technical Specification:

Properties:
Specific gravity (at 20°C) : 1.05
Flash point (10%) : Non Flammable
pH (10%) : 12.0 - 12.5
Colour : Clear
Odour : citrus

Remarks:

During Tank Cleaning operation, Re-circulation method can be considered one of POPULAR METHOD. TIPS for uses of TANK CLEAN ECO.

1. First of all remove and strip all residue manually from Tank bottom and wall, Then flush tanks with the copious amount of seawater if possible by using the high-pressure machine to remove remaining cargo to slop. (As per MARPOL 78/73)

2. Then recirculate hot water inside the tanks at least for 2-10 hr, this will helps to remove oily-mud and residues in the coating/steel.

3. Then again take fresh hot water inside the tank and use Tank Clean ECO 0.5 - 2 %. And continue recirculation 2-8 hr. And continuously try to maintain temperature of 60 - 65 Degree Centigrade. Hot recirculation will improve the cleaning result. Do not overheat, as this may burn the cargo. otherwise, The water is heated by means of the heating coils, cargo heat exchanger or Butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on the type of cargo).

4. Again Flush entire tanks with a large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.
5. Flush tanks with freshwater to remove salts, mop and dry.

RXSOL TANK Clean ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.

Images:

LiveChat

Search form

DYE REMOVER-ORG DICHLOR

Zinc Coating Conditioner & Cleaner

Gasoil Kerosine / Gasoline Cleaner

Tank Clean WWT

Marine Clean SC

Phthatalates Cleaner

Phenol Cleaner

Tall Oil (Crude rosin) Cleaner

Fish Oil Turpentines Cleaner

Tankclean ECO

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat